ไปรษณีย์ไทย

ARDUINO L293D Motor Drive Shield Expansion Board for Arduino Mega / UNO / Duemilanove

รหัสสินค้า: SHMOT01
สถานะสินค้า: มีสินค้า
ราคา:
110.00บาท

ไม่รวมภาษี: 110.00บาท
ARDUINO / DHT22 / AM2302 Digital Temperature And Humidity Sensor Replace SHT11 SHT15
RS485 to Wifi 802.11 b/g/n  Converter
จำนวน: - +
   - หรือ -   

Product description

ARDUINO L293D Motor Drive Shield Expansion Board for Arduino Mega / UNO / Duemilanove

 

L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts, thats some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge.
The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.

  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
  • Can drive 4 DC motors or 2 stepper motors or 2 Servo.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection.
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC.
  • Pull down resistors keep motors disabled during power-up.
  • reset button.
  • 2 external terminal power interface, for seperate logic/motor supplies.
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove.
  • Size:6.8cm x 5.5cm x 2cm - 2.68inch x 2.17inch x 0.79inch.

Package include:
1  x  ARDUINO L293D Motor Drive Shield Expansion Board for Arduino Mega / UNO / Duemilanove

 

 

เขียนข้อคิดเห็น


ชื่อของคุณ:


ความคิดเห็น: หมายเหตุ: ไม่รองรับข้อความที่มีรูปแบบ เช่น HTML!

ให้คะแนน: แย่           ดี

พิมพ์รหัสป้องกันสแปม:




สินค้าล่าสุด Opencart